e-trunk (system view)

Function

The e-trunk command creates an E-Trunk.

The undo e-trunk command deletes an E-Trunk.

Only the S5720-EI, S5720-HI, S5720I-SI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720-LI, S6720S-EI, S6720S-LI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

e-trunk e-trunk-id

undo e-trunk e-trunk-id

Parameters

Parameter	Description	Value
e-trunk-id	Specifies the ID of an E-Trunk.	The value is an integer that ranges from 1 to 16.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

If the specified E-Trunk already exists, this command directly displays the view of the specified E-Trunk.

At most 16 E-Trunks can be created on a device.

After an E-Trunk is created, it does not send protocol packets until the remote IP address is configured.

Example

# Create an E-Trunk with the ID of 1.

<HUAWEI> system-view
[HUAWEI] e-trunk 1
[HUAWEI-e-trunk-1]