The easy-operation client ztp-with-cfg enable command enables pre-configured device deployment.
The undo easy-operation client ztp-with-cfg enable command disables pre-configured device deployment.
By default, pre-configured device deployment is disabled.
Usage Scenario
Before delivery, a device can load a configuration file that contains commands for specifying file server addresses, name of an intermediate file for site deployment, and a shared key between the device and an SNMP host. To enable pre-configured device deployment, run the easy-operation client ztp-with-cfg enable command. After simple login configuration, the device can then automatically obtain and load correct configurations, reducing the manual operation cost.
Precautions
The easy-operation client ztp-with-cfg enable command is contained only in a device's pre-delivery configuration file. It is not allowed to run this command after device delivery.
If you do not need the pre-configured device deployment function, run the undo easy-operation client ztp-with-cfg enable command in the system view to disable this function.