The easy-operation commander ip-address command configures the Commander IP address.
The undo easy-operation commander ip-address command deletes the Commander IP address.
By default, no Commander IP address is configured.
easy-operation commander ip-address ip-address [ udp-port udp-port ]
undo easy-operation commander ip-address [ ip-address [ udp-port udp-port ] ]
| Parameter | Description | Value |
|---|---|---|
ip-address |
Specifies the Commander IP address. |
The value is in dotted decimal notation. |
udp-port udp-port |
Specifies the UDP port number that the Commander uses to communicate with clients. |
The value is an integer in the range from 1025 to 65535. The default value is 60000. |
Usage Scenario
After an IP address is configured for the Commander, clients can communicate with the Commander through this IP address. To implement a batch upgrade, you need to specify the Commander IP address on clients. In zero touch provisioning (ZTP) and faulty device replacement scenarios, clients obtain the Commander IP address from the DHCP server.
Precautions
The configured Commander IP address must exist on the device that functions as the Commander.
The Commander IP address cannot be the IP address of the VLANIF interface bound to a VPN.
After the Commander function is enabled on the switch, changing the Commander IP address is not allowed on the switch. Otherwise, the Commander cannot detect and manage clients.
In batch upgrade scenarios, the Commander and clients must be configured with the same Commander IP address and UDP port number. Otherwise, clients cannot communicate with the Commander.