enable (terminal type identification profile view)

Function

The enable command enables terminal type identification.

The undo enable command disables terminal type identification.

By default, terminal type identification is disabled.

This function is supported only by S5730-HI, S5731-H, S5731S-H, S6730-H, S6730S-H, S5732-H, S6720-HI, and S5720-HI.

Format

enable

undo enable

Parameters

None

Views

Terminal type identification profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The terminal type identification profile takes effect immediately when terminal type identification is enabled. The AC analyzes the terminal's MAC address, DHCP Option, and UA information. If the information matches the rules configured in the profile, the AC identifies the terminal type.

Prerequisite

A terminal type identifier has been configured using the device-type command.

Example

# Enable terminal type identification.

<HUAWEI> system-view
[HUAWEI] device-profile profile-name huawei
[HUAWEI-device-profile-huawei] device-type huawei
[HUAWEI-device-profile-huawei] enable