dhcpv6 pool

Function

The dhcpv6 pool command creates an IPv6/IPv6 PD address pool or displays the IPv6/IPv6 PD address pool view.

The undo dhcpv6 pool command deletes the created IPv6/IPv6 PD address pool.

By default, no IPv6/IPv6 PD address pool is created.

Format

dhcpv6 pool pool-name

undo dhcpv6 pool pool-name

Parameters

Parameter	Description	Value
pool-name	Specifies the name of an IPv6/IPv6 PD address pool.	The value is a string of 1 to 31 case-sensitive characters without spaces. The value contains digits, letters, underscores (_), and dots (.).

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The dhcpv6 pool command is used on DHCPv6/DHCPv6 PD servers. When configuring the DHCPv6/DHCPv6 PD server, run the dhcpv6 pool command to create an IPv6/IPv6 PD address pool for the DHCPv6/DHCPv6 PD server to assign IPv6 addresses or prefixes to DHCPv6/DHCPv6 PD clients.

Example

# Create an IPv6 address pool DHCPv6POOL.

<HUAWEI> system-view
[HUAWEI] dhcpv6 pool DHCPv6POOL