display dhcpv6 relay

Function

The display dhcpv6 relay command displays the configuration of the interface enabled with the DHCPv6 relay function.

Format

display dhcpv6 relay [ interface interface-type interface-number ]

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays the configuration of the specified interface. interface-type specifies the interface type. interface-number specifies the interface number.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If no interface is specified, the configuration of all the interfaces enabled with the DHCPv6 relay function is displayed.

Example

# Display the configurations of all interfaces enabled with the DHCPv6 relay function.

<HUAWEI> display dhcpv6 relay 
Interface               Mode          Destination
-------------------------------------------------------------------------
GigabitEthernet0/0/1    Relay        FC00:4::3
Vlanif10                Relay        FC00:1::1:1
--------------------------------------------------------------------------------
 Print count : 2                    Total count : 2

**Table 1** Description of the **display dhcpv6 relay** command output
Item	Description
Interface	Interface enabled with DHCPv6 relay functions.
Mode	DHCPv6 function mode.
Destination	Destination address of DHCPv6 relay messages. Address pointing to the DHCPv6 server, address of the next-hop DHCPv6 relay, or DHCPv6 server group. To configure the address, run the dhcpv6 relay destination or dhcpv6 relay server-select command.
Print count	The number of interfaces enabled with DHCPv6 relay functions that are displayed.
Total count	The total number of interfaces enabled with DHCPv6 relay functions.