vendor-specific

Function

The vendor-specific command configures vendor-defined options for the IPv6 address pool and enter the vendor-defined mode view.

The undo vendor-specific command deletes vendor-defined options configured for the IPv6 address pool.

By default, no vendor-defined option is configured.

Format

vendor-specific vendor-id

undo vendor-specific vendor-id

Parameters

Parameter	Description	Value
vendor-id	Indicates the ID of the vendor, which is assigned by the IANA. 2011 is the identifier for Huawei.	The value is an integer that ranges from 1 to 4294967295.

Views

IPv6 address pool view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The vendor-specific command is used on DHCP servers. You can use the vendor-specific command to enter the vendor-defined mode. In this mode, you can configure the vendor-defined DHCPv6 options. The DHCPv6 device can carry vendor-defined options such as the TFTP server name and address, and the configuration file of the device.

Precautions

A maximum of eight vendor-defined modes are configured for one IPv6 address pool. 2011 is the identifier for Huawei.

Example

# Configure Huawei-defined options for the IPv6 address pool pool1.

<HUAWEI> system-view
[HUAWEI] dhcpv6 pool pool1
[HUAWEI-dhcpv6-pool-pool1] vendor-specific 2011
[HUAWEI-dhcpv6-pool-pool1-vs-2011]