explicit-path

Function

The explicit-path command configures an explicit path of a tunnel.

The undo explicit-path command deletes a configured explicit path.

By default, no explicit path of a tunnel is configured.

Format

explicit-path path-name

undo explicit-path path-name

Parameters

Parameter	Description	Value
path-name	Indicates the name of an explicit path.	The value is a string of 1 to 31 case-insensitive characters, spaces not supported.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

You must enable MPLS TE before running the explicit-path command.

The addresses of the hops along the explicit path must be different, without loops. If a loop exists, CSPF detects the loop and fails to compute a path.

If the explicit path is in use, the undo explicit-path command cannot be run to delete the explicit path.

Example

# Create an explicit path named path1.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] mpls te
[HUAWEI-mpls] quit
[HUAWEI] explicit-path path1
[HUAWEI-explicit-path-path1] quit