fib trap lpm-fail interval

Function

The fib trap lpm-fail interval command sets the interval for generating traps when FIB entries fail to be delivered.

The undo fib trap lpm-fail interval command restores the default interval for generating traps when FIB entries fail to be delivered.

By default, traps are generated at an interval of 60s when FIB entries fail to be delivered.

Only the S6720-SI, S6720S-SI, S5730-SI, S5730S-EI, S6720-LI, and S6720S-LI support this command.

Format

fib trap lpm-fail interval interval-number

undo fib trap lpm-fail interval

Parameters

Parameter	Description	Value
interval-number	Sets the interval for generating traps.	The value is an integer that ranges from 30 to 3600, in seconds. The default value is 60.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

FIB entries may fail to be delivered because of an LPM algorithm error. By default, traps are generated at an interval of 60s when FIB entries fail to be delivered because of an LPM algorithm error. To change the interval, run the fib trap lpm-fail interval interval-number command.

Example

# Set the interval for generating traps when FIB entries fail to be delivered to 90s.

<HUAWEI> system-view

[HUAWEI] fib trap lpm-fail interval 90