fragment-reassemble overflow-mode

Function

The fragment-reassemble overflow-mode command configures the action to take on fragments that overflow the cache.

The undo fragment-reassemble overflow-mode command restores the default action to take on fragments that overflow the cache.

By default, the system forwards the fragments that overflow the cache to ensure services.

fragment-reassemble overflow-mode { discard | forward }

undo fragment-reassemble overflow-mode

Parameter	Description	Value
discard	Discards the fragments that overflow the cache.	-
forward	Forwards the fragments that overflow the cache.	-

System view

2: Configuration level

Usage Scenario

If the action is set to discard, the system discards the fragments that overflow the cache, which may interrupt services.

Prerequisites

Before running this command, you must run the defence engine enable command to enable the IAE.

# Configure the action to take on fragments that overflow the cache to discard.

<HUAWEI> system-view
[HUAWEI] defence engine enable
[HUAWEI] fragment-reassemble overflow-mode discard