The graceful-restart timer wait-for-rib command sets the length of time that the BGP restarter waits for the End-Of-RIB flag.
The undo graceful-restart timer wait-for-rib command deletes the configured length of time that the BGP restarter waits for the End-Of-RIB flag.
By default, the time that the BGP restarter waits for the End-Of-RIB flag is 600 seconds.
| Parameter | Description | Value |
|---|---|---|
| time | Specifies the length of time that the BGP restarter waits for the End-Of-RIB flag. | The value is an integer that ranges from 3 to 3000, in seconds. |
Usage Scenario
When the BGP session is set up or reestablished, the BGP restarter must receive the End-Of-RIB flag in the period set by using this command. If the BGP restarter does not receive the End-Of-RIB flag, ensure that the switch can exit from the GR process.
Prerequisites
The graceful-restart timer wait-for-rib command can be run only after the graceful-restart command is run.
Configuration Impact
The latest configuration overrides the previous one.
Precautions
If there are a large number of routes, set a larger value for the time parameter to ensure that all routes will be updated.