haca-server server-address

Function

The haca-server server-address command configures the IP address and port number for the HACA server.

The undo haca-server server-address command deletes the IP address and port number configured for the HACA server.

By default, the IP address and port number of the HACA server are not configured on the device.

Format

haca-server server-address ip-address [ port ] pki-realm-name

undo haca-server server-address [ ip-address [ port ] ]

Parameters

Parameter	Description	Value
ip-address	Specifies the IP address of an HACA server.	The value is in dotted decimal notation. It must be a valid unicast address.
port	Specifies the port number of an HACA server. If the parameter is not specified, the default value is used.	The value is an integer that ranges from 1 to 65535. The default value is 50300.
pki-realm-name	Specifies the name of a PKI domain.	The value must be an existing PKI domain name.

Parameter

Description

Value

ip-address

Specifies the IP address of an HACA server.

The value is in dotted decimal notation. It must be a valid unicast address.

port

Specifies the port number of an HACA server.

If the parameter is not specified, the default value is used.

The value is an integer that ranges from 1 to 65535. The default value is 50300.

pki-realm-name

Specifies the name of a PKI domain.

The value must be an existing PKI domain name.

Views

HACA server template view

Default Level

3: Management level

Usage Guidelines

The device needs to be connected to an HACA server for authentication. The HACA server is located on the Internet. Therefore, the device sends authentication packets to the HACA server only after the IP address and port number of the HACA server are specified.

Example

# Configure the IP address of the HACA server to 10.1.1.1.

<HUAWEI> system-view
[HUAWEI] haca-server template haca
[HUAWEI-haca-haca] haca-server server-address 10.1.1.1 default