haca enable

Function

The haca enable command enables the HACA function.

The undo haca enable command disables the HACA function.

By default, HACA is disabled.

Format

haca enable

undo haca enable

Parameters

None

Views

HACA server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The authentication server is located on the cloud, so packets between the device and server must traverse the NAT device. However, Portal protocol packets cannot traverse the NAT device. HACA implements communication between the device and server, and then Portal authentication can be performed.

If you require HACA authentication, run the haca enable command to enable HACA.

Prerequisites

The IP address and port number of the HACA server have been configured using the haca-server server-address command.

Example

# Enable HACA.

<HUAWEI> system-view
[HUAWEI] haca-server template haca
[HUAWEI-haca-haca] haca-server server-address 10.1.1.1 default
[HUAWEI-haca-haca] haca enable