The host-route command adds host routes with 32 bits into the routing table.
The undo host-route command disables host routes with 32 bits from being added into the routing table.
By default, host routes can be added into the routing table.
host-route
undo host-route
None
RIP view
2: Configuration level
This command applies to RIP-1. In RIP-2, host routes are added to the routing table, regardless of whether the command is run.
# Add host routes into the routing table.
<HUAWEI> system-view [HUAWEI] rip 1 [HUAWEI-rip-1] host-route