hwtacacs-server authentication user-name in-authentication-start

Function

The hwtacacs-server authentication user-name in-authentication-start command configures a user name to be carried in the Authentication Start packet of an administrator.

The undo hwtacacs-server authentication user-name in-authentication-start command configures a user name not to be carried in the Authentication Start packet of an administrator.

By default, the Authentication Start packet of an administrator does not carry a user name.

Format

hwtacacs-server authentication user-name in-authentication-start

undo hwtacacs-server authentication user-name in-authentication-start

Parameters

None

Views

HWTACACS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

By default, the Authentication Start packet sent by the device to the HWTACACS server does not carry a user name. When the device connects to a specific server, the server identifies whether a user is an administrator based on the user name carried in the Authentication Start packet received from the device. To configure a user name to be carried in the Authentication Start packet of an administrator, run the hwtacacs-server authentication user-name in-authentication-start command.

Precautions

This function takes effect only for administrators.

Example

# Configure a user name to be carried in the Authentication Start packet of an administrator.

<HUAWEI> system-view
[HUAWEI] hwtacacs-server template test1
[HUAWEI-hwtacacs-test1] hwtacacs-server authentication user-name in-authentication-start