hwtacacs-server traffic-unit

Function

The hwtacacs-server traffic-unit command sets the traffic unit used by an HWTACACS server.

The undo hwtacacs-server traffic-unit command restores the default traffic unit used by the HWTACACS server.

By default, the traffic unit is byte on the device.

Format

hwtacacs-server traffic-unit { byte | kbyte | mbyte | gbyte }

undo hwtacacs-server traffic-unit

Parameters

Parameter	Description	Value
byte	Indicates that the traffic unit is byte.	-
kbyte	Indicates that the traffic unit is KByte.	-
mbyte	Indicates that the traffic unit is MByte.	-
gbyte	Indicates that the traffic unit is GByte.	-

Views

HWTACACS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Different HWTACACS servers may use different traffic units; therefore, you need to set the traffic unit for each HWTACACS server group on the device and the traffic unit must be the same as that on the HWTACACS server.

Precautions

You can modify this configuration only when the HWTACACS server template is not in use.

Example

# Set the traffic unit used by an HWTACACS server to KByte.

<HUAWEI> system-view
[HUAWEI] hwtacacs-server template template1
[HUAWEI-hwtacacs-template1] hwtacacs-server traffic-unit kbyte