idle-cut (service scheme view)

Function

The idle-cut command enables the idle-cut function for domain users and sets the idle-cut parameters.

The undo idle-cut command disables the idle-cut function.

By default, the idle-cut function is disabled for domain users.

Format

idle-cut idle-time flow-value [ inbound | outbound ]

undo idle-cut

Parameters

Parameter	Description	Value
idle-time	Specifies the period in which an idle user can stay online.	The value is an integer that ranges from 1 to 1440, in minutes.
flow-value	Specifies the traffic threshold for idle-cut function. When the traffic of a user stays below this threshold for a certain period, the device considers that the user is in idle state.	The value is an integer that ranges from 0 to 4294967295, in kbytes.
inbound	Indicates that the idle-cut function takes effect for only upstream traffic of users.	-
outbound	Indicates that the idle-cut function takes effect for only downstream traffic of users. NOTE: If neither inbound nor outbound is specified, the idle-cut function takes effect for both upstream and downstream traffic.	-

Views

Service scheme view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If a user uses no or a little network traffic for a long time, the user still occupies certain bandwidth, which reduces access rate of other users. The idle-cut function disconnects the users whose traffic volume stays below the traffic threshold within the idle time, to save resources and improve service experience of other users.

Precautions

The idle-cut command configured in the service scheme view takes effect for administrators. For common users, the function takes effect only for wireless users.
When idle-cut in the service scheme view and RADIUS attribute 28 (Idle-Timeout) delivered by the remote RADIUS server exist simultaneously, RADIUS attribute 28 has a higher priority. RADIUS attribute 28 can be used together with the traffic and direction configured using this command.

Example

# Enable the idle-cut function for the domain, and set the idle time to 1 minute and the traffic threshold to 10 kbytes.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] service-scheme huawei 
[HUAWEI-aaa-service-huawei] idle-cut 1 10