if-match any

Function

The if-match any command configures a matching rule based on all data packets in a traffic classifier.

The undo if-match any command deletes a matching rule based on all data packets in a traffic classifier.

By default, a matching rule based on all data packets is not configured in a traffic classifier.

Format

if-match any

undo if-match any

Parameters

None

Views

Traffic classifier view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To process all the data packets in the same manner, run the if-match any command.

Prerequisites

A traffic classifier has been created using the traffic classifier command in the system view.

Precautions

After the if-match any command is run, only the matching rule configured using this command takes effect, and the other matching rules in the same traffic classifier will become ineffective.

Example

# Configure a matching rule based on all data packets in the traffic classifier c1.

<HUAWEI> system-view
[HUAWEI] traffic classifier c1 operator and
[HUAWEI-classifier-c1] if-match any