if-match outbound-interface

Function

The if-match outbound-interface command configures a matching rule based on an outbound interface in a traffic classifier.

The undo if-match outbound-interface command deletes a matching rule based on an outbound interface in a traffic classifier.

By default, a matching rule based on an outbound interface is not configured in a traffic classifier.

The S2720-EI, S5720-LI, S5720S-LI, S5720-SI, S5720I-SI, S5720S-SI, S5730-SI, S5730S-EI, S6720-LI, S6720S-LI, S6720-SI, and S6720S-SI do not support this command.

Format

if-match outbound-interface interface-type interface-number

undo if-match outbound-interface

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the type and number of an outbound interface. interface-type specifies the interface type. interface-number specifies the interface number.	-

Views

Traffic classifier view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the if-match outbound-interface command to classify packets based on an outbound interface so that the device processes packets matching the same traffic classifier in the same manner.

Prerequisites

A traffic classifier has been created using the traffic classifier command in the system view.

Precautions

A traffic policy containing if-match outbound-interface cannot be applied to an interface.

For the S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S, the outbound interface in this command cannot be an Eth-Trunk member interface.

A traffic policy containing the if-match outbound-interface rule can only be applied to the outbound direction on the S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735S-S, S5735-S-I, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S.

If you run the if-match outbound-interface command in the same traffic classifier view multiple times, only the latest configuration takes effect.

Example

# Configure a matching rule based on the outbound interface of GE0/0/1 in the traffic classifier class1.

<HUAWEI> system-view
[HUAWEI] traffic classifier class1
[HUAWEI-classifier-class1] if-match outbound-interface gigabitethernet 0/0/1