The info-center rate-limit monitor-period command sets the monitoring period for the information center to suppress the log processing rate.
The undo info-center rate-limit monitor-period command restores the default value.
By default, the monitoring period is 3 seconds.
| Parameter | Description | Value |
|---|---|---|
| value | Specifies the monitoring period for the information center to suppress the log processing rate. | The value is an integer ranging from 1 to 60, in seconds. |
In the monitoring period specified by value, if the rate of sending a single log every second exceeds the threshold configured using the info-center rate-limit threshold command, the information center will limit the log processing rate. In this situation, the information center discards logs exceeding the threshold.
In the monitoring period that is five times value, if the number of a single type of logs that are sent every second is smaller than the threshold configured using the info-center rate-limit threshold command, the information center does not limit the log processing rate.