info-center trapbuffer

Function

The info-center trapbuffer command enables the Switch to send traps to the trap buffer.

The undo info-center trapbuffer command disables the Switch from sending traps to the trap buffer.

By default, the Switch is enabled to send traps to the trap buffer.

Format

info-center trapbuffer

undo info-center trapbuffer

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

To view traps in the trap buffer, run the info-center trapbuffer command to enable the Switch to send traps to the trap buffer.

The info-center trapbuffer command takes effect only after the information center function has been enabled using the info-center enable command.

Example

# Enable the Switch to send traps to the trap buffer.

<HUAWEI> system-view
[HUAWEI] info-center trapbuffer