interface-parameter-type vccv (interface view)

Function

The interface-parameter-type vccv command configures Mapping packets to carry the VCCV byte.

The undo interface-parameter-type vccv command deletes the VCCV byte (an interface parameter) in the Mapping packet.

By default, a Mapping packet carries the VCCV byte.

interface-parameter-type vccv [ secondary ]

undo interface-parameter-type vccv [ secondary ]

Parameter	Description	Value
secondary	Indicates that the configuration applies to the secondary VC. If this keyword is not specified, the command applies to the primary VC. The command can be configured only when a local VC exists.	-

Interface view

2: Configuration level

The command can be configured only when a local VC exists.

# When configuring the VLL in LDP mode on an interface, delete the VCCV byte in the Mapping packet.

<HUAWEI> system-view
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] mpls l2vc 2.2.2.2 100
[HUAWEI-Vlanif10] undo interface-parameter-type vccv