interface fabric-port

Function

The interface fabric-port command creates a fabric port and displays the fabric port view.

The undo interface fabric-port command deletes a fabric port.

By default, no fabric port exists in the system.

This command can only be executed on a parent switch.

interface fabric-port port-id

undo interface fabric-port port-id

Parameter	Description	Value
port-id	Specifies the number of a fabric port.	The value range on the parent varies depending on the switch model: S12700/S12700E: 0 to 255 MCUD/SRUK/MFUX/MPUE/SRUE/SRUHA1/SRUHX1/SRUH: 0 to 255 Other switch models: 0 to 63

Parameter

Description

Value

port-id

Specifies the number of a fabric port.

The value range on the parent varies depending on the switch model:

uni-mng view

3: Management level

To set up an SVF system, create fabric ports on the parent switches to allow ASs to connect to the parent switches.

# Create a fabric port and enter the fabric port view.

<HUAWEI> system-view
[HUAWEI] uni-mng
[HUAWEI-um] interface fabric-port 1