ip-address

Function

The ip-address command configures an IP address for a PKI entity.

The undo ip-address command deletes the configuration.

By default, a PKI entity does not have an IP address.

Format

ip-address { ipv4-address | interface-type interface-number }

undo ip-address

Parameters

Parameter	Description	Value
ipv4-address	Specifies the IPv4 address of a PKI entity.	The value is in dotted decimal notation.
interface-type interface-number	Specifies an interface IP address of a PKI entity. interface-type specifies the interface type. interface-number specifies the interface number.	-

Parameter

Description

Value

ipv4-address

Specifies the IPv4 address of a PKI entity.

The value is in dotted decimal notation.

interface-type interface-number

Specifies an interface IP address of a PKI entity.

interface-type specifies the interface type.
interface-number specifies the interface number.

Views

PKI entity view

Default Level

2: Configuration level

Usage Guidelines

The parameters of a PKI entity include the identity information of the PKI entity. The CA identifies a certificate applicant based on identity information provided by a PKI entity. To facilitate applicant identification, configure an IP address for the PKI entity, which is used as an alias of the PKI entity.

After an IP address is configured for a PKI entity, the certificate request packet sent by the device to the CA server carries this IP address. After receiving the certificate request packet, the CA server verifies the packet. For each valid packet, the CA server generates a digital certificate carrying the device IP address.

Example

# Set an IP address 10.1.1.1 for a PKI entity.

<HUAWEI> system-view
[HUAWEI] pki entity entity1
[HUAWEI-pki-entity-entity1] ip-address 10.1.1.1