ip-group service timer reconnection

Function

The ip-group service timer reconnection command configures an IP-GROUP channel reconnection interval.

The undo ip-group service timer reconnection command restores the default configuration.

By default, the IP-GROUP channel reconnection interval is 1 minute.

This command is supported only when the device interoperates with iMaster NCE-Campus.

Format

ip-group service timer reconnection interval

undo ip-group service timer reconnection

Parameters

Parameter	Description	Value
interval	Specifies the IP-GROUP channel reconnection interval.	The value is an integer in the range from 1 to 255, in minutes.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the IP-GROUP channel fails, the device periodically attempts to set up an IP-GROUP channel with a controller at the specified interval.

Precautions

If you want to modify the configuration after the IP-GROUP channel is established, run the undo ip-group service ip-address command to delete the IP-GROUP channel first.

Example

# Set the IP-GROUP channel reconnection interval to 2 minutes.

<HUAWEI> system-view
[HUAWEI] ip-group service timer reconnection 2