ipv6-address-avail

Function

The ipv6-address-avail command configures available types of IPv6 addresses on a Hotspot2.0 network.

The undo ipv6-address-avail command deletes available types of IPv6 addresses on a Hotspot2.0 network.

By default, no available type of IPv6 addresses is configured.

Format

ipv6-address-avail { not-available | available | unknown }

undo ipv6-address-avail

Parameters

Parameter	Description	Value
not-available	Indicates that IPv6 addresses are not available.	-
available	Indicates that IPv6 addresses are available.	-
unknown	Indicates that availability of the IPv6 address type is not known.	-

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When user terminals connect to a Hotspot2.0 network, Hotspot2.0 can transfer available IPv6 address types as ANQP parameters to the user terminals through APs. In this way, the user terminals can know the IPv6 address types they can obtain after connecting to the network.

Example

# Set IPv6 addresses to available in hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] ipv6-address-avail available