The ipv6-family command enters the IPv6 address family view of BGP.
The undo ipv6-family command quits the IPv6 address family view and deletes the configurations in the view.
ipv6-family [ vpnv6 ](supported only by the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730S-H, and S6730-H)
ipv6-family [ unicast | vpn-instance vpn-instance-name ]
undo ipv6-family [ vpnv6 ] (supported only by the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730S-H, and S6730-H)
undo ipv6-family [ unicast | vpn-instance vpn-instance-name ]
| Parameter | Description | Value |
|---|---|---|
unicast |
Displays the unicast address family view. |
- |
vpnv6 |
Displays the BGP-VPNv6 address family view. |
- |
vpn-instance vpn-instance-name |
Associates a specified VPN instance with the IPv6 address family. You can enter the BGP-VPN instance IPv6 address family view by using the parameter. NOTE:
The parameter is only supported on S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S. |
The value must be an existing VPN instance name. |
Usage Scenario
If no parameter is specified, the IPv6 address family view is displayed by default. The undo ipv6-family command without any parameter is used to delete configurations in the BGP-IPv6 unicast address family view.
Precautions
The undo ipv6-family command without any parameters deletes all IPv6 unicast address family configurations.