The ipv6 vpn6-instance command creates an IPv6 VPN instance and displays the IPv6 VPN instance view.
The undo ipv6 vpn6-instance command deletes a specified IPv6 VPN instance.
By default, no IPv6 VPN instance exists.
ipv6 vpn6-instance vpn6-instance-name
undo ipv6 vpn6-instance vpn6-instance-name
vpn6-instance-name
Specifies the name of an IPv6 VPN instance.
The name is a string of 1 to 31 case-sensitive characters without any spaces.
System view
2: Configuration level
After this command is run, an IPv6 VPN instance is created and the IPv6 VPN instance view is displayed.