join-prune triggered-message-cache disable (IPv4)

Function

The join-prune triggered-message-cache disable command disables the Join/Prune message package function.

The undo join-prune triggered-message-cache disable command enables the Join/Prune message package function.

By default, the Join/Prune message package function is enabled.

Format

join-prune triggered-message-cache disable

undo join-prune triggered-message-cache disable

Parameters

None

Views

PIM view of public network instance or PIM view of VPN instance

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The system performs more efficiently when sending package of PIM Join/Prune messages than when sending a large number of individual PIM Join/Prune messages. A switch sends PIM Join/Prune messages in packages. To disable the package function, run the join-prune triggered-message-cache disable command.

Prerequisites

IP multicast routing has been enabled using the multicast routing-enable command.

Precautions

This command is valid for PIM-SM and PIM-DM.

Example

# Disable the Join/Prune message package function.

<HUAWEI> system-view
[HUAWEI] multicast routing-enable
[HUAWEI] pim
[HUAWEI-pim] join-prune triggered-message-cache disable