join-prune triggered-message-cache disable (IPv6)

Function

The join-prune triggered-message-cache disable command disables the Join/Prune message package function.

The undo join-prune triggered-message-cache disable command enables the Join/Prune message package function.

By default, the Join/Prune message package function is enabled.

Format

join-prune triggered-message-cache disable

undo join-prune triggered-message-cache disable

Parameters

None

Views

PIM-IPv6 view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The system performs more efficiently when sending a package of Join/Prune messages than sending a large number of individual Join/Prune messages. A device sends Join/Prune messages in packages. To disable the package function, run the join-prune triggered-message-cache disable command.

Prerequisites

IPv6 multicast routing has been enabled globally using the multicast ipv6 routing-enable command in the system view.

Precautions

This command is valid for PIM-SM (IPv6) and PIM-DM (IPv6).

Example

# Disable the Join/Prune message package function.

<HUAWEI> system-view
[HUAWEI] multicast ipv6 routing-enable
[HUAWEI] pim-ipv6
[HUAWEI-pim6] join-prune triggered-message-cache disable