l2-multicast user-vlan limit

Function

The l2-multicast user-vlan limit command sets the number of user VLANs that are allowed.

The undo l2-multicast user-vlan limit command restores the default configuration.

By default, 512 user VLANs can be configured.

Format

l2-multicast user-vlan limit number

undo l2-multicast user-vlan limit

This command is supported only on the S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735-S-I, and S5735S-S.

Parameters

Parameter	Description	Value
number	Specifies the number of user VLANs that can be configured.	The value is an integer in the range from 1 to 1000.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

User VLANs and the Layer 3 VLANIF service share resources. Too large a number of user VLANs will affect the specification of VLANIF interfaces. You can run the l2-multicast user-vlan limit command to adjust the number of user VLANs that can be configured based on your service requirements.

Example

# Set the number of user VLANs that can be configured to 300.

<HUAWEI> system-view
[HUAWEI] l2-multicast user-vlan limit 300