The l3-forward-entry aging enable command enables the l3-forward-entry aging function.
The undo l3-forward-entry aging enable command disables the l3-forward-entry aging function.
By default, the l3-forward-entry aging function is disabled.
Product |
Support |
|---|---|
S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S |
Supported |
S2720-EI, S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730S-EI, S5730-SI, S6720-LI, S6720S-LI, S6720S-SI, and S6720-SI |
Not supported |
The l3-forward-entry aging enable command must be used together with the l3-forward-entry regularly-check command. After the l3-forward-entry aging function is enabled, the system reads the periodic l3-forward-entry check result everyday between 2 am and 5 am. When residual Layer 3 forwarding entries exist for more than 48 hours, the system triggers resource recycling and entry deletion.