The l3-forward-entry self-healing enable command enables l3-forward-entry self-healing.
The undo l3-forward-entry self-healing enable command disables l3-forward-entry self-healing.
By default, the l3-forward-entry self-healing function is disabled.
Product |
Support |
|---|---|
S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S |
Supported |
S2720-EI, S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730S-EI, S5730-SI, S6720-LI, S6720S-LI, S6720S-SI, and S6720-SI |
Not supported |
After the l3-forward-entry regularly-check command is configured on a switch, the switch periodically checks l3-forward-entries to ensure real-time and effective forwarding of data at the bottom layer. In this situation, if the l3-forward-entry self-healing enable command is configured to enable l3-forward-entry self-healing, the switch can repair l3-forward-entries for self-healing based on the check result to ensure correct packet forwarding.