The learn-client-address enable command enables terminal address learning on an AP's wired interface.
The undo learn-client-address enable command disables terminal address learning on an AP's wired interface.
By default, terminal address learning is disabled on an AP's wired interface.
Usage Scenario
After terminal address learning is enabled on an AP's wired interface, if a wired terminal connected to the AP wired interface successfully obtains an IP address, the AP automatically reports the IP address of the terminal to the AC, helping to maintain the ARP binding entries of wired terminals.
Prerequisites
You have disabled the DHCP trusted interface by running undo dhcp trust port in the AP wired port profile view.
Follow-up Procedure
Bind the AP wired port profile to an AP group or AP.
Precautions
The AP wired interfaces added to an Eth-trunk interface do not support this function.