license server

Function

The license server command specifies the IP address of the license server on a license client. This IP address must be the same as the CAPWAP source address configured on the license server.

The undo license server command deletes the local IP address of the license server on a license client.

By default, no IP address is set for the license server.

Format

license server ip-address ip-address

undo license server

Parameters

Parameter	Description	Value
ip-address ip-address	Specifies the IPv4 address of the license server.	The value is in dotted decimal notation.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After centralized license control is enabled, you can run the license server command on a license client to set an IP address for the license server, so that the license client can set up a link with the license server and be managed by the license server.

Prerequisites

The local IP address of the license client has been configured. Run the license client source ip-address ip-address command to configure a local IP address for a license client.

When multiple CAPWAP source addresses exist (for example, on switches), this configuration specifies a CAPWAP source address as the local IP address.
If this configuration is skipped, the first CAPWAP source address is used as the local IP address of a license client by default.

Example

# Set the IP address for the license server to 10.1.1.1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] license server ip-address 10.1.1.1