location-profile

Function

The location-profile command binds a location profile to an AP radio.

The undo location-profile command unbinds a location profile from an AP radio.

By default, no location profile is bound to a radio.

Format

location-profile profile-name radio { radio-id | all }

undo location-profile radio { radio-id | all }

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a location profile.	The location profile name must already exist.
radio radio-id	Specifies the ID of the radio to which the location profile is bound.	The value is an integer that ranges from 0 to 2. Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD.
all	Binds the location profile to all radios.	-

Parameter

Description

Value

profile-name

Specifies the name of a location profile.

The location profile name must already exist.

radio radio-id

Specifies the ID of the radio to which the location profile is bound.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AirEngine 8760-X1-PRO, AirEngine 8760R-X1E, AirEngine 6760-X1, AirEngine 6760-X1E, AirEngine 5760-51, AP4030TN, AP4051TN, AP8050TN-HD.

all

Binds the location profile to all radios.

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

You can run this command to bind a location profile to an AP group radio or AP radio. After the binding, the parameters of the location profile will be applied to the AP group radio or AP radio.

Example

# Bind the location profile default to radio 0 of the AP group ap-group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name ap-group1
[HUAWEI-wlan-ap-group-ap-group1] location-profile default radio 0