location

Function

The location command configures the installation position of an AP.

The undo location command deletes the installation position of an AP.

By default, an AP's installation position is not configured.

location location-value

undo location

Parameter	Description	Value
location-value	Specifies the installation position of an AP.	The value is a string of 1 to 63 case-sensitive characters. If the value contains space, it must start with and end with the quotation mark ("), for example, "huawei name1". The quotation mark in the value occupies one character. The value cannot start or end with spaces and double quotation marks ("), for example, " HUAWEI" and "HUAWEI " are not allowed.

AP group view, AP view

2: Configuration level

You can run this command to configure the installation position of an AP.

# Configure the installation position of an AP to B2-5F-01.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-id 0
[HUAWEI-wlan-ap-0] location B2-5F-01