loss-measure single-ended continual send test-id
Function
The loss-measure single-ended continual send test-id command enables single-ended frame loss measurement based on the test instance.
The undo loss-measure single-ended continual send test-id command disables on-demand single-ended frame loss measurement.
By default, on-demand single-ended frame loss measurement is disabled.
Only the S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.
Format
loss-measure single-ended continual send test-id test-id interval { 1000 | 10000 | 30000 }
undo loss-measure single-ended continual send [ test-id test-id ]
Parameters
| Parameter | Description | Value |
|---|---|---|
| test-idtest-id | Specifies the ID of a test instance. | The value is an integer in the range from 1 to 4294967295. |
| interval | Specifies the interval at which LMMs are sent. | The value is 1000, 10000, or 30000, in milliseconds. |
Usage Guidelines
Usage Scenario
Statistics based on a test instance are mainly used in the P2MP scenario. You can run this command to collect non-stop packet loss statistics.
Prerequisites
The test-id test-id command has been run in the MA view to create a test instance.
Example
# Enable single-ended frame loss measurement based on test instance 1 in the VLAN scenario and set the interval to 30 seconds.
<HUAWEI> system-view [HUAWEI] cfm enable [HUAWEI] cfm md md1 [HUAWEI-md-md1] ma ma1 [HUAWEI-md-md1-ma-ma1] map vlan 10 [HUAWEI-md-md1-ma-ma1] loss-measure single-ended continual send test-id 1 interval 30000