loss-measure single-ended send test-id
Function
The loss-measure single-ended send test-id command enables single-ended frame loss measurement based on the test instance.
By default, single-ended frame loss measurement based on the test instance is disabled.
Only the S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-HI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.
Parameters
| Parameter | Description | Value |
|---|---|---|
| test-id | Specifies the ID of a test instance. | The value is an integer in the range from 1 to 4294967295. |
| interval | Specifies the interval at which LMMs are sent. | The value is 1000 or 10000, in milliseconds. |
| count count-value | Specifies the single-ended frame loss measurement count. | The value is an integer in the range from 1 to 60. |
Usage Guidelines
Usage Scenario
Statistics collection based on the test instance is applicable to the P2MP scenario. You can run this command to check the packet loss on the link periodically or once only.
Prerequisites
The test-id test-id command has been run in the MA view to create a test instance.
Example
# In the VLAN scenario, enable single-ended frame loss measurement based on the test instance 1 and set the measurement interval to 10 seconds and measurement count to 60 times.
<HUAWEI> system-view [HUAWEI] cfm enable [HUAWEI] cfm md md1 [HUAWEI-md-md1] ma ma1 [HUAWEI-md-md1-ma-ma1] map vlan 10 [HUAWEI-md-md1-ma-ma1] loss-measure single-ended send test-id 1 interval 10000 count 60