The mac-address flapping quit-vlan recover-time command sets the delay time an interface waits to join a VLAN again after it is removed from the VLAN due to MAC address flapping.
The undo mac-address flapping quit-vlan recover-time command restores the default delay time.
By default, the delay time is 10 minutes.
mac-address flapping quit-vlan recover-time time-value
undo mac-address flapping quit-vlan recover-time
Parameter |
Description |
Value |
|---|---|---|
time-value |
Specifies the delay time an interface waits to join a VLAN again after it is removed from the VLAN due to MAC address flapping. |
The value is an integer ranging from 0 to 1440, in minutes. The default value is 10. The value 0 indicates that the interface cannot join a VLAN again after it is removed from the VLAN. |
Usage Scenario
If an interface is removed from a VLAN because MAC address flapping occurs in the VLAN, the interface can automatically join the VLAN again after a delay.
Precautions
If an interface is removed from multiple VLANs due to MAC address flapping, the system counts the delay time since the interface is removed from the last VLAN.