The mad relay command enables the relay
function on an interface of a proxy device.
The undo
mad relay command disables the relay function on an interface
of a proxy device.
By default, the relay function is disabled
on an interface.
Format
mad relay
undo mad
relay
Parameters
None
Views
Eth-Trunk interface view, port group view
Default Level
2: Configuration level
Usage Guidelines
For MAD working in relay mode, run the mad relay command to configure the relay function on an Eth-Trunk interface
of a proxy device. Member interfaces of the Eth-Trunk interface exchange
MAD packets between member switches.
Example
# Enable the relay function on Eth-Trunk 10 of a proxy
device.