map

Function

The map command associates a VLAN with an MA.

The undo map command disassociates a VLAN from an MA.

By default, an MA is not associated with any VLAN.

map vlan vlan-id

undo map vlan

Parameter	Description	Value
vlan-id	Specifies the ID of a VLAN.	The value is an integer that ranges from 1 to 4094.

MA view

2: Configuration level

Usage Scenario

Ethernet CFM detects connectivity faults in each MA. After an MA is associated with a VLAN, Ethernet CFM can detect connectivity faults in the VLAN.

Precautions

If CFM is used to detect connectivity faults between two directly connected devices, the MA does not need to be associated with a VLAN.

An MA can be associated with only one VLAN.

You can create or delete the association between an MA and a VLAN only when no MEP or RMEP is configured in the MA.

Before changing the VLAN associated with an MA, use the undo map command to disassociate the MA from the VLAN.

# Associate an MA with VLAN 10. The MA is not associated with any VLAN before the configuration.

<HUAWEI> system-view
[HUAWEI] cfm enable
[HUAWEI] cfm md md1
[HUAWEI-md-md1] ma ma1
[HUAWEI-md-md1-ma-ma1] map vlan 10