mep ccm-send enable

Function

The mep ccm-send enable command enables a MEP in an MA to send CCMs.

The undo mep ccm-send enable command disables a MEP in an MA from sending CCMs.

By default, a MEP is disabled from sending CCMs.

mep ccm-send [ mep-id mep-id ] enable

undo mep ccm-send [ mep-id mep-id ] enable

Parameter	Description	Value
mep-id mep-id	Specifies the ID of a MEP. If this parameter is not specified, all the MEPs in the MA are enabled to send CCMs or disabled from sending CCMs.	The value of mep-id is an integer that ranges from 1 to 8191.

MA view

2: Configuration level

Usage Scenario

After you use the mep mep-id command to configure a MEP, use this command to enable the MEP to send CCMs.

Precautions

The interval at which CCMs are sent or received cannot be modified on the device in an MA if one of the following operations is performed:

The mep ccm-send enable command is run to enable a MEP in an MA to send CCMs.
The remote mep ccm-receive enable command is run to enable a MEP in an MA to receive CCMs.

The undo mep ccm-send enable or remote mep ccm-receive enable command must be run before the interval is reconfigured.

# Enable MEP 10 in the MA named ma1 to send CCMs.

<HUAWEI> system-view
[HUAWEI] cfm md md1
[HUAWEI-md-md1] ma ma1
[HUAWEI-md-md1-ma-ma1] mep ccm-send mep-id 10 enable