mesh-whitelist-profile (AP group radio view or AP radio view)

Function

The mesh-whitelist-profile command binds a Mesh whitelist profile to an AP radio.

The undo mesh-whitelist-profile command unbinds a Mesh whitelist profile from an AP radio.

By default, no Mesh whitelist profile is bound to an AP radio.

Format

mesh-whitelist-profile whitelist-name

undo mesh-whitelist-profile

Parameters

Parameter	Description	Value
whitelist-name	Specifies the name of the Mesh whitelist profile bound to an AP radio.	The Mesh whitelist profile must exist.

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

After a Mesh whitelist profile is applied to an AP radio, the AP radio can only set up Mesh links with neighboring APs whose MAC addresses are in the Mesh whitelist profile.

On a Mesh network where ATs are deployed, after FWA is enabled in a Mesh profile using the fwa enable command, you can complete the Mesh service configuration without the need to bind a Mesh whitelist profile to an AP radio. However, in other Mesh application scenarios, an AP radio must have a Mesh whitelist profile bound, and the Mesh whitelist profile must have MAC addresses configured.

An AP radio can only have one Mesh whitelist profile bound. If you run the command multiple times on the same AP radio, the latest configuration overwrites the old one.

On a triple-radio AP, radio 2 does not support the Mesh function.

Example

# Create the Mesh whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the Mesh whitelist profile whitelist to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mesh-whitelist-profile name whitelist
[HUAWEI-wlan-mesh-whitelist-whitelist] peer-ap mac 0001-0001-0001
[HUAWEI-wlan-mesh-whitelist-whitelist] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] mesh-whitelist-profile whitelist