mobility-server local

Function

The mobility-server local command configures a local IP address for setting up links between ACs in a mobility group.

The undo mobility-server local command deletes the local IP address for setting up links between ACs in a mobility group.

By default, no local IP address is configured for setting up links between ACs in a mobility group.

Format

mobility-server local ip-address ipv4-address

undo mobility-server local

Parameters

Parameter	Description	Value
ip-address ipv4-address	Specifies an IPv4 address for setting up links between ACs in a mobility group.	The value is in dotted decimal notation.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In inter-AC roaming scenarios, you need to specify a local IP address for STAs to roam between ACs.

Precautions

The specified IP address must be the same as the CAPWAP source IP address. When multiple CAPWAP source addresses are configured, only one can be specified as the local IP address for setting up links between ACs.

Example

# Configure 192.168.10.1 as the local IP address for setting up links between ACs in a mobility group.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mobility-server local ip-address 192.168.10.1