mpls l2vpn default martini

Function

The mpls l2vpn default martini command configures the dynamic VC signaling not to carry status information.

The undo mpls l2vpn default martini command restores the default configuration.

By default, the dynamic VC signaling carries status information.

Format

mpls l2vpn default martini

undo mpls l2vpn default martini

Parameters

None

Views

MPLS-L2VPN view

Default Level

2: Configuration level

Usage Guidelines

To configure the dynamic VC signaling not to carry status information in VLL scenarios, run the mpls l2vpn default martini command. In other scenarios, do not run this command.

If the dynamic VC signaling carries status information, the local end can send Notification messages to the peer end. For details about Notification messages, see Chapter "PWE3 Principles" in the "PWE3 Configuration".
Before using the mpls l2vpn default martini command, you must delete the configurations of VCs (including PWE3 VCs and VPLS VCs) that support Notification messages.

Example

# Configure the dynamic VC signaling not to carry status information.

<HUAWEI> system-view
[HUAWEI] mpls l2vpn
[HUAWEI-l2vpn] mpls l2vpn default martini

# Restore the default dynamic VC signaling configuration.

<HUAWEI> system-view
[HUAWEI] mpls l2vpn
[HUAWEI-l2vpn] undo mpls l2vpn default martini