mpls rsvp-te

Function

The mpls rsvp-te command enables the RSVP-TE function on an interface or globally.

The undo mpls rsvp-te command disables the RSVP-TE function.

RSVP-TE is disabled by default.

Format

mpls rsvp-te

undo mpls rsvp-te

Parameters

None

Views

MPLS view, VLANIF interface view, GE interface view, XGE interface view, MultiGE interface view, 25GE interface view, 40GE interface view, 100GE interface view, Eth-trunk interface view

Default Level

2: Configuration level

Usage Guidelines

Prerequisites

You must run the mpls (system view) and mpls te commands to enable MPLS and MPLS TE before running the mpls rsvp-te command in the MPLS view.

You must run the mpls (interface view) and mpls te commands to enable MPLS and MPLS TE before running the mpls rsvp-te command in the interface view.

Precautions

Before enabling the RSVP-TE function on an interface, you need to run this command in the MPLS view to enable the RSVP-TE function globally.

After the undo mpls rsvp-te command is run in the MPLS view, MPLS RSVP-TE services may be interrupted and all MPLS RSVP-TE configurations are deleted. To restore the MPLS RSVP-TE services, reconfigure these commands.

Example

# Enable RSVP-TE globally.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] mpls te
[HUAWEI-mpls] mpls rsvp-te

# Enable RSVP-TE on interface VLANIF100.

<HUAWEI> system-view
[HUAWEI] interface vlanif 100
[HUAWEI-Vlanif100] mpls
[HUAWEI-Vlanif100] mpls te
[HUAWEI-Vlanif100] mpls rsvp-te

# Enable RSVP-TE on interface GE0/0/1.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo portswitch
[HUAWEI-GigabitEthernet0/0/1] mpls
[HUAWEI-GigabitEthernet0/0/1] mpls te
[HUAWEI-GigabitEthernet0/0/1] mpls rsvp-te