mpls rsvp-te bfd block

Function

The mpls rsvp-te bfd block command blocks the BFD for RSVP capability on an interface.

The undo mpls rsvp-te bfd block command restores the default configuration.

By default, the BFD for RSVP capability on an interface is not blocked.

Format

mpls rsvp-te bfd block

undo mpls rsvp-te bfd block

Parameters

None

Views

VLANIF interface view, GE interface view, XGE interface view, MultiGE interface view, 25GE interface view, 40GE interface view, 100GE interface view, Eth-trunk interface view

Default Level

2: Configuration level

Usage Guidelines

The mpls rsvp-te bfd block command and the mpls rsvp-te bfd enable command are mutually exclusive.

The mpls rsvp-te bfd block command is similar to the undo mpls rsvp-te bfd enable command. Their differences are as follows:

When the undo mpls rsvp-te bfd enable command is run to disable BFD for RSVP on an RSVP interface, the interface can obtain the BFD for RSVP capability after you configure the mpls rsvp-te bfd all-interfaces enable command in the MPLS view.
When the mpls rsvp-te bfd block command is run on an interface, the interface cannot obtain the BFD for RSVP capability even if the mpls rsvp-te bfd all-interfaces enable command is run in the MPLS view.

To enable the BFD for RSVP capability on a majority of interfaces, you can run the mpls rsvp-te bfd block command on a minority of interfaces that do not need to be enabled with BFD for RSVP. Then, you can run the mpls rsvp-te bfd all-interfaces enable command in the MPLS view to enable the BFD for RSVP capability for the desired majority.
To enable BFD for RSVP capability on a few interfaces, you can run the mpls rsvp-te bfd enable command on these specific interfaces. In addition, you can run the undo mpls rsvp-te bfd enable command or the mpls rsvp-te bfd block command to disable BFD for RSVP on these interfaces.

Example

# Disable BFD for RSVP on interface VLANIF100.

<HUAWEI> system-view
[HUAWEI] interface vlanif 100
[HUAWEI-Vlanif100] mpls
[HUAWEI-Vlanif100] mpls te
[HUAWEI-Vlanif100] mpls rsvp-te
[HUAWEI-Vlanif100] mpls rsvp-te bfd block

# Disable BFD for RSVP on interface GE0/0/1.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo portswitch
[HUAWEI-GigabitEthernet0/0/1] mpls
[HUAWEI-GigabitEthernet0/0/1] mpls te
[HUAWEI-GigabitEthernet0/0/1] mpls rsvp-te
[HUAWEI-GigabitEthernet0/0/1] mpls rsvp-te bfd block