mpls rsvp-te fast-reroute-bandwidth compatible

Function

The mpls rsvp-te fast-reroute-bandwidth compatible command configures the bandwidth of FRR objects to be saved in the integer mode.

The undo mpls rsvp-te fast-reroute-bandwidth compatible command restores the default configuration.

By default, the bandwidth of FRR objects is saved in the float point mode.

Format

mpls rsvp-te fast-reroute-bandwidth compatible

undo mpls rsvp-te fast-reroute-bandwidth compatible

Parameters

None

Views

MPLS view

Default Level

2: Configuration level

Usage Guidelines

When Huawei devices communicate with devices from other vendors whose saving mode of the bandwidth of FRR objects is set to the integer mode, you need to run this command to set the saving mode of the bandwidth of FRR objects to the integer mode.

Example

# Configure the saving mode of the bandwidth of FRR objects as the integer mode.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] mpls rsvp-te fast-reroute-bandwidth compatible