mpls rsvp-te timer refresh

Function

The mpls rsvp-te timer refresh command sets an interval at which RSVP Refresh messages are sent.

The undo mpls rsvp-te timer refresh command restores the default setting.

The time interval is 30 seconds by default.

Format

mpls rsvp-te timer refresh refresh-interval

undo mpls rsvp-te timer refresh

Parameters

Parameter	Description	Value
refresh-interval	Specifies the interval at which RSVP Refresh messages are sent.	An integer ranging from 10 to 65535 in seconds.

Views

MPLS view

Default Level

2: Configuration level

Usage Guidelines

RSVP-TE has been enabled by running the mpls rsvp-te command.

If the interval at which RSVP Refresh messages are sent is changed, the new interval can only take effect after the previous refreshing timer expires. Therefore, you are not recommended to set an excessively long refreshing interval, or frequently change a refreshing interval.

Example

# Set the interval at which RSVP Refresh messages are sent to 60s.

<HUAWEI> system-view
[HUAWEI] mpls
[HUAWEI-mpls] mpls te
[HUAWEI-mpls] mpls rsvp-te
[HUAWEI-mpls] mpls rsvp-te timer refresh 60